Today, we obd2 would offer a reputable auto scanner, Lexia 3 pp2000, working well on Citroen C5.
LEXIA-3 PP2000 Hardware and software requirements:
1. Computer system:XP system
Software requires at least Intel Celeron/Pentium III 400 MHz,128 MB RAM,50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
2. Computer cannot install anti-virus software.
3. PP2000 cannot install with DIAGBOX in same computer.
How to connect Lexia 3 PP2000 to Citroen:
1. Look under the Citroen driver-side dashboard for the diagnostic trouble code (DTC) connection port. It is black, rectangular-shaped and roughly one inch wide by a 1/4-inch tall. It should have a small cap on it to prevent dirt from entering the connector. Quite often the cap will have the letters "DTC" embossed on it.
2. Remove the cover from the connection port and move the cover off to the side. Lexia 3 PP2000 should be attached to the port by a thin strand of plastic to prevent the cap from being lost.Plug in your Lexia 3PP2000's OBD-ii cable to the connection port.
3. Turn on your Lexia 3 PP2000 diagnostic tool,Write the codes down from the Lexia 3 PP2000 Peugeot Citroen Diagnostic tool, once you have them, as you will need to refer to them during the troubleshooting process that is easy to contact and use it.
Ps. This connection diagram is not based on C5; but the connection way is the same as that.
LEXIA 3 PP2000 Works well on Citroen C5:
Inside PCB board display:
921815C chip is of high quality, the same as original chip.
LEXIA-3 PP2000 also for the following Peugeot Citroen:
留言列表
