Appareils Mixtes Chauds - diyobd2.fr

Step by step procedure on how to program key on Benz W211 when All Key Lost using VVDI Prog + VVDI EZS Adapter.

Tool source:

VVDI Prog (Used to read EIS dump file)

VVDIEZSAdapter

VVDI MB (used to prepare key and write)

Confirmed! CAR KEY PRO III key programmer is able to read out immobilizer data with a decent programming tool (recommendation: XPRROG). Here, have  tested successfully with BMW CAS4+ and CAS3+

Part 1: Car key pro iii and cas4+

Part 2:  Car key pro iii and cas3+

in detail...

Part 1: Car key pro iii reads BMW CAS4+ data

Since so many of you are searching FNR Key Prog 4-in-1 software but all dead links.

Here a WORKING FNR Key Prog software link:

Ford Key Prog+ Renault Key Prog+ Nissan Key Prog+ Ford Incode Calculator

Free download FNR Key Prog 4-in-1 for Renault Nissan Ford Software all-in-one:

https://en.file-upload.net/download-12313337/sk127-KEYPROG4IN1.iso.html

Condor Dolphin Key Cutting Machine is new key cutting machine used on App via bluetooth,here is how to use  Condor Dolphin Cut Honda HON66 key.

1.Xhorse APP on your phone.Condor Dolphin Key Cutting Machine.

2.Connect Condor Dolphin with Phone via bluetooth.

3.Choose "All Key Lost" in the menu.

4.Input the number and then continue.

Free download FVDI 2018 2015 2014 software:

FVDI 2018 v3.0 download (published on 20th-July-2018):

https://mega.nz/#!KRBzVIrD!uE0ZGjYAbTv0sEZPQjLN0jejex_yI0IF9R3Wad21f7g

Original FVDI 2015 v9.0 download (published on 20th-July-2018):

https://mega.nz/#!3BxWQYJR!xV3dDkp6xsPRaHBqUwsHPnicTCPwGW5Hl1IRLyLCbo0

Xhorse VVDI2 - There are several different versions here (VVDI2 BASIC Version,VVDI2 BASIC + VAG Version,VVDI2 BASIC + BMW Version,VVDI2 Full Version,VVDI2 Full Authorization Version),Send SN Number To US,Check Which Function Already Added.

Notice:VVDI2 Products and VVDI2 Authorization on New Year Promotion Now:

http://www.xhorsevvdi.com/producttags/new-year-sale.html

Contact Susie For Good Price: Whatsapp:+86-13983756354

How to distinguish them?

The Mercedes-Benz 204, 207, and 212 lock (ELV/ESL) sometimes may be damaged, and the malfunction can be like following faults:the remote control works but the key cannot be turned on dashboard, the ELV is not unlocked, and the car cannot be started.etc Here we will introduce ways to repair the ELV error with Xhorse VVDI MB Tool.

Firstly,we need to know whether the internal motor is damaged or the NEC chip is locked. Use the VVDI MB TOOl to connect the vehicle via OBD way, click "Check ESL damage" and you will get any of following display:

Free download CGDI Prog BMW 2.4.0 apk:

http://www.obd2diy.fr/wholesale/cgdi-prog-cas4-programmeur-de-cle-pour-bmw.html

Date: 14-12-2018

CGDI BMW 2.4.0 update info:

1. New: BMW data modification function:

XHORSE VVDI BE Key Pro For Benz XNBZ01CH Remote Key Chip Improved Version is free with 200 points,which can be exchange to one BGA token,315/433mhz both supported,you can switch by yourself.

If the Red button key shell with Xhorse Benz Key pcb may be a little rasied just like below pic shows,and you can fix like the following steps to lower it,it is easy fix:

1.Open the key shell.

2.This Panic button place is a little bit higher.

3.Cut down,do not take much.

Confirmed! Lonsdor K518ISE works no issues in Peugeot 408 PIN code reading and new key programming when do all keys are lost.

Peugeot key type:

Letf- Folding key (-2013)

Center- Smart remote (2014-)

Right- Folding smart remote (2014-)

Xhorse VAG MM007 now supports simulation of MQB platform Engine+Gateway+BCM. You can add MQB key with VAG MM-007 and dashboard. Here is some steps.

1: Collect control unit data, and use VAG MM007 to collect engine, gateway, and BCM data respectively.

Main Menu ->Simulator-> Data Acquisition.

2: Start the simulation, there are two ways to start the simulation.

Method 1: Enter VAG-MM007 Main Menu -> Device Simulation -> Start Simulation -> Select SD Card File to start simulation, follow the prompts.

TMPro2 hardware update instruction:

Why do you need update TMPro2 hardware?

Because you will get these extras after you get TMPro box updated:

Special place for wedge shape ceramic transponder for easy fixing during reading and programming operations.

Special place for round shape glass transponder for easy fixing during reading and programming operations.